build diary

July 6, 2004: After all the excitement of the first drive on the 4th, I took the day off to do other things.
Well, mostly. I did find the time to change the upper control arm on the right rear wheel. I had to replace the right rear upper arm when the original was found to have a misaligned bracket. Well, the bracket that was used for the replacement was drilled further out than the original arm for the left side. Luckily the left side part will fit the right if it's flipped upside down. Installing it gave me an extra 1.5 degrees of negative camber, putting the alignment right where I wanted it.

entry 419 of 1439
<< | random | >>
back to entry listing