build diary

April 19, 2006:
According to Ron Champion, all you do now is just use the scuttle and nose and bend the aluminum around.
Umm, it's not quite as simple as that sounds.
entry 1210
After some fairly lightweight work (well, by comparison to my first time around anyhow), here's how the hood fits without anything holding it down.
Whoops, something seems to be missing.
entry 1211
Now with a hole for the intake system and latches.
entry 1212
Louvres, now pointing the correct way.
entry 1213

April 20, 2006:
After a fairly easy night of packing and relaxing (not a completely even distribution of the two, but better than might be expected), I dropped the Seven off at a local upholstery shop to have a tonneau cover made for the rear.
Was this a good idea? Good question. I figured the cover would make a big difference, closing off the last mechanical area of the car. It was certainly a risk, leaving the car in the hands of a stranger only hours before my departure. It didn't help when they seemed a little puzzled when I showed up with the car at 8 am. So it was a moment of doubt as I left the shop with my car parked inside.

A few hours later, I got a phone call that the work was done. I jumped in the Jeep - once again, my girlfriend Janel has allowed me to use her precious Grand Cherokee as a beast of burden - and headed over with the trailer. To my great relief, the tonneau looked great. It was exactly what I wanted, closing off the rear nicely without impeding access to my fuel tank and giving the Seven a proper boot.

So, car strapped down and Jeep full of items such as two spare sets of tires, a set of cornerweight scales, an air tank, jack, tools, spare nuts and bolts and even a small Shop Vac, I took off for Texas.

That last sentence does overplay the sense of occasion that remained a few hours later. While I had beautiful weather for my trip over the high Red Mountain Pass, New Mexico proved to be long, flat and dull. The northern section of the state is not a rich area and I felt a little conspicuous. It's not the sort of place you build a little bright orange sports car for the hell of it. More entertaining was the fact that I saw many signs that announced my altitude as 7000'. Always 7000 and always fairly randomly. At one point, I decended a fairly major slope shortly after a 7000' sign and was presented with one that said 6800'. Okay, someone at the New Mexico DOT is playing games.

I stayed with my friends Sam and Carol Sharp in Alberquerque after rolling in fairly late. It might have added a bit of time to my trip, but it's always more pleasant to stay with someone after a long day on the road.
entry 1214

April 21, 2006:
Ugh, long long drive.
Sam and I ran around a little in the morning to have a big breakfast and then hunt down a plug for my O2 sensor bung. I like to remove the sensor for photos to make the car look a little better and I'd left my plug in Grand Junction. Whoops. So a relatively late start but at least I missed the traffic.

Drive drive drive. Boooring. The Jeep thought so as well as it decided to liven things up a bit. Some bad gas in Texas meant I had to stop at a WalMart and buy some miracle fuel injector cleaner and a bottle of octane boost just for fun. Miracle cure it was, the Jeep decided to let all the cylinders wake up and we carried on. A late night and I arrived at Curtis Wiseman's house after managing to completely confuse myself in his neighbourhood.
entry 1215

April 22, 2006:
Ahh, the Se7ens festival.
Turns out the festival is really a NASA race weekend with a Se7ens parking area. Fair enough, it made for some very interesting scenery running around - two Porsche Carrera GTs, for example - and a real track bias amongst participants. I was given a hearty welcome by the organisers and unloaded the car. Shortly after, Mark Rivera showed up with his heroic build that went from daily driver Miata to running Locost in about 4 months. He quickly set to work installing seats, side panels, fenders and a number of other pieces that some consider important to a functional car. Since I knew his car should be significantly faster than mine, I decided to emphasise my finished state by polishing. And polishing. And polishing. Mark suggested that perhaps I should spend some time ensuring the car was running well and I scoffed. After all, it's a Miata engine and it was running beautifully at home.

Chris Fiaccone showed up shortly after with his car. While he hasn't been quite as crazed as Mark over the last few months, he did step up the pace to have his motorcycle engined car ready. And it is a stunner. Painted flat black with some really nice touches on the rear lights and around the exhaust, it looked like a mutant hot rod and showed some beautiful workmanship. Another car faster than mine, so I polished some more.

A fourth Locost showed up as well. Jon's car was built partially as a father/son project, partially to let Jon learn metalworking skills and partly for the Grassroots Motorsports $2005 challenge. It's amazing. Jon built the nose cone and all other body parts by hand. It looks more like a Lotus 6 than a Lotus 7, but the amount of work involved rocks everyone back on their feet. I knew that I couldn't out-polish this one so I stopped and decided to go for a spin.

As has become tradition, the Seven decided to foul up a couple of plugs to celebrate the arrival at a new track. It also was running very rich as I discovered on a short run. Why? Well, thanks to my super-cool throttle bodies it runs in a fairly narrow range of vacuum. And that range had just shifted drastically enough that my highway cruise at sea level was similar to my wide open throttle at altitude. I took off to do some tuning and try to settle the car. I also discovered that the synchronisation between the two pairs of throttle bodies had developed a problem and my idle was now about 1300 rpm if I was lucky. At home it's closer to 850. It's as if there is a big vacuum leak but I can't find it anywhere. I had to dump a lot of extra fuel in the idle zones in the computer and pull a huge amount out of the cruise. Hmm, maybe I did spend too long polishing.

Or maybe not. I started talking to Howard Cole from Kit Car magazine and he did a photo shoot of the car. Hopefully he'll give a review of the book and accompany it with some photos of the real thing.

So, other than the poor running and stinky black smoke in the pits, how was it? Well, the car was very well received. The most common comment was that it looks far better in person than in my website, and the color in particular blew people away. I guess my photos don't show that it's metallic. This is probably because the car is usually dirty and photographed in a dim garage. I've also been working to improve the presentation recently. As always, the Birkin/Caterham/Ultralite owners were extremely welcoming.
entry 1216

April 23, 2006:
Tuning troubles.
Argh. The Seven was running better after I plugged in the laptop and made some major adjustments to the setup, but it still wouldn't idle happily. I played with the synchronisation of the throttle bodies without much luck as the problem seemed to be heat related. When cold, the car would behave just as it does at home. As it warmed up, the throttles would start to stick a little and the exhaust would belch black smoke as I blipped the throttle. Is it a synchronisation problem or something else? Given ambient temperatures around 90F, heat was quite possibly a factor. Above 4500 rpm or so, it runs strong. Below that there's a flat spot. I've been back to the computer a number of times to try and sort it out. If I'd kept my stock intake manifold, this wouldn't be an issue at all. It's very embarassing, especially when Larry Webster from Car and Driver is hanging about and I can't get out from underhood. Even he said the car looked much better in person than in the book.

I did manage to get out on track at one point. Brian from World Class Motorsports took me out in one of their Ultralites. The Motorsport Ranch is a fairly quick track but one that has a lot of very odd corners. The most impressive things about the car were the brakes and the unchecked acceleration above 100 mph. Where my car is running out of steam, the S2000 engine goes into VTEC mode and leaps forward. A very compelling ride.

We took the group of four Locosts out for a few little photo shoots and to let Larry drive them. He commented on the hot footwell in my car (true, especially in the 90F Texas heat) and on the poor idle. He was happy with the way the car handled the bumpy back road we were using for the test drive. It was a good test of compliance, that's for sure. The new suspension did a great job of sucking it up despite the high spring rates. When Chris Fiaccone had the chance to drive the car, he was really impressed with how well it braked and how well it rode. "It feels like a real car" was his comment. He also felt it made his car feel unfinished, but then again I've had an extra couple of years to tweak mine! The brakes were what really seemed to get his attention. It appears my work here has been worthwhile.

While Mark had no problems with his manic turbo Locost, Chris was having some teething problems. He'd been battling with them yesterday but I'd been too busy to pay much attention. I was able to donate a couple of fasteners to the cause and help him find a major running problem that had the car immobilised. Once that was sorted out, he was able to take to the road to the sound of cheering from the spectators who had watched his long battle. Unfortunately, he discovered that the car got very unstable on deceleration. We spent some time looking at the front suspension to try and find this and it wasn't until late in the day that someone discovered play in the rear suspension. It turns out that one of his wheel bearings was completely shot so the left rear wheel was flopping around. A local Spec Miata race shop was willing to help us out with a new rear hub but they'd just used up their last spare. It's a real shame that Chris will have to miss out on the drag strip session tomorrow but I think he'll be just as happy to go home and sleep for about a week! I'm glad I got a chance to see his car though, it is a beauty. I even had the chance to get behind the wheel and try it out. It's almost 400 lbs lighter than my Seven - yes, that's right - and it feels as if it's going to be a total riot when it's all done. The car is a rocket and a real looker.

Tomorrow we head to the drag strip for some instrumented testing. My car will likely end up in the middle of the three as it's the lightest and has a bit more power than Jon's gorgeous low-budget build, and of course I can't touch Mark's car for horsepower. My car's still not happy at around 4000 rpm but hopefully that won't be an issue in this sort of testing. I guess I'll know soon enough - the laptop will be busy!

An interesting side note - neither Chris nor Mark had ever seen a Seven before, never mind driven one! They decided to build their cars based on other reasons. I've been a Seven enthusiast for a long, long time. I guess it does show that if you're looking for a cheap sports car (ooh, subtle plug there!), the template is a difficult one to ignore.
entry 1217

April 24, 2006:
My poor tires.
Larry Webster from Car and Driver was finished with the straight-line data acquisition (0-60, 1/4 mile, braking) and went off to do a quick skidpad test on an open area we'd found. Jeff Dworin (the Car and Driver art director) and I followed in the minivan and Larry wasn't hanging around on the way. He seemed to have bonded with the car. Once he hit the skidpad, he discovered just how easy it is to hang the tail out on the Seven. He proceeded to do a couple of complete circuits sideways. When he came in, he was laughing and claimed "I could do that all day!" He encouraged me to give it a shot so I could feel a difference in behaviour between left and right turns. I came in laughing like an idiot. It didn't take much encouragement to get Larry back out there as I ran the video camera. A few laps in one direction, then he tried going the other way and it worked just as well. "This car is a drift machine! Man, that was fun." was the verdict. He had definitely been enjoying himself. I was worried yesterday that he hadn't had enough seat time to really appreciate the car, but I'm not worried about that anymore. He even started to think out loud about building one of his own. Ahh, so he did understand.

The day started off early. Chris was unfortunately absent, but Jon and Mark were there with their creations. Jon's BMW 318i-based car was run first, then the turbo car. Larry was impressed with the speed of Mark's buggy. It was twitchy on the transition from the sticky dragstrip to the asphalt run-out area and we could hear a surprising amount of tire noise as the car hit the high-traction surface. After the runs, there was visible toe-out. The lower control arms had bent under braking, allowing the wheels to move backwards. It must have been quite a ride but Larry kept it all tidy and out of the big retaining walls lining the drag strip. Mark was pretty happy with the results - the car's a bit heavier than he had originally expected and the performance was about what he expected when the extra weight was taken into consideration. Jon sounded a bit disappointed as the times weren't quite as good as he saw in Florida at the GRM Challenge.

Time for the little orange car. From the sidelines, it sounded absolutely glorious. A full-throated induction beat combined with the exhaust howl to make a classic patented Sports Car Sound. The turbocharged cars I deal with at work just can't do that. Jeff had a big grin on his face as we watched the car tear up and down and I was having a hard time maintaining a professional demeanor and not dancing around. Larry was very impressed with the brakes ("Porsche 911 braking distances!") and was definitely enjoying himself. He reported that it felt much more settled and stable than the other cars and wasn't bothered by the transition of surfaces at all. Fair enough, the car's had more track-biased development than Jon's car and of course Mark hasn't had time yet. My car was in its element.

So how did it perform?
0-60 in 4.7 seconds
0-90 in 10.8 seconds
0-100 in 14.8 seconds
1/4 mile time of 13.8 seconds with a trap speed of 97.4
70-0 braking in 141.4 ft and 1.156G
0.98G on the skidpad

For comparison, a Porsche 911 Carrera S takes 154 feet to stop. A 2005 Corvette Z-06 corners at the same 0.98G. The baddest Aston Martin on sale right now - the V12 Vanquish S - takes 4.8 seconds for 0-60.
It was obvious from the side of the track that aero became a real problem in 4th gear as the acceleration tailed off. You can see this in the difference between the 0-90 and 0-100 times. I had asked if I could remove the windshield but that apparently is cheating. We were going to try it later but got distracted by the hooligan potential on the skidpad. Regardless, I'm tickled pink with the performance and even happier with confirmation that the car does indeed seem to work as well as I'd hoped. I've been aiming for a world-class sports car and not just an oddity that was notable for being, well, odd. It looks as if I might have pulled it off. Larry's sheer joy when he got out of the car was a big reward. I'm very interested to see how he writes the article.

The asymmetrical handling? I think it might have been a low-pressure rear tire. There was a flat on the car by the end of the day. I'd checked pressures before testing to be sure, so it could also be a setup issue. The extreme caster means the steering is quite heavy when sliding the car (I've always had trouble with catching really big slides in the car) so I'll experiment with that as well. The rear tires are looking well scrubbed in by now though! I'll have some video up soon that shows just what happened to all that rubber.

A long drive home, but I'm very happy with how the trip turned out. Despite the earlier problems, the Seven delivered when it was asked to give a full effort and I was able to sort out the driveability problems with some tweaking of the computer.
entry 1218

April 26, 2006:
The new tonneau cover.
It makes a huge difference to the finish of the car but it does hide my cool gas tank.
entry 1219
Chances are you already know about this website.
Thanks to Jonathan for providing the decals!
entry 1220
The fit of the new hood.
As usual, I put a bit of electrical tape along the edge to finish it off. You can see the metallic in the paint in this shot as well - most people at the Se7ens festival were surprised at how the paint looks.
entry 1221
The long tow to Texas.
From this vista on Red Mountain pass, I went to the flat scrublands of Texas and New Mexico. Noontime temperatures ranged from 97F to 34F on the way home!
entry 1222
At the Southwest Se7ens Festival.
entry 1223
A wide range of cars showed up at the festival.
From left, we have a Caterham, Birkin, Ultralite, some weird orange car, BMW-powered Locost and there's even a Stalker hiding somewhere else.
entry 1224
Mark Rivera assembles his car at the event.
entry 1225
Mark's car has a potent turbo Miata engine underhood.
It's a quick little thing. Well, not that little.
entry 1226
Mark decided to make his own fenders from steel.
They're not too light, but they're solid and look kinda cool.
entry 1227
Chris' matt black bike-engined car.
This thing is a head-turner.
entry 1228
The exhaust on Chris's car.
The stainless surround and polished pipes against the matt black paint really stand out.
entry 1229
Nicely integrated bike instruments on Chris' car.
Note the kart wheel to match the (unseen) kart seats.
entry 1230
This Birkin has a very well-made wooden dash.
It might not be as sexy as carbon fibre but it's a good material for a little sports car.
entry 1231
Jon built this nose cone - and all the rest of his bodywork - from scratch.
entry 1232
Four very different Locosts together.
Mine's hiding in the back because that's where the photographer wanted it.
entry 1233
A photo session for Kit Car.
entry 1234
Pretty car.
entry 1235
A tired tire.
It was worked pretty hard during the "skidpad" session as you can see from the wear, but it also seems to have developed a leak that was later traced to a nail.
entry 1236
<< | show individual entries | >>